Clear-Com Tempest 2400

Description The Tempest CM-244 (4-channel) BaseStation in the most powerful system in its class. In Normal Mode, the Tempest2400 wireless system can have up to 5 Wireless BeltStations per BaseStation in full duplex mode, simultaneous operation. A total of 10 Tempest BaseStations and 50 Tempest full duplex wireless BeltStations can operate in close proximity while maintaining excellent system performance. The Shared and Split modes offer increased user capacity and operational flexibility. The CM-244 Tempest2400 BaseStations are compatible with Clear-Com, RTS or AudioCom partyline 4-wire, matrix or 2-wire intercom systems. * The Tempest2400 BaseStations is equipped with Stage Announce, Stage Relay, Auxiliary In / Out and Relay, Remote Mic Kill, Minimum and Maximum volume levels adjustable on a basis by BeltStation, and Wired BeltStation Call capabilities. Battery monitoring is available through BaseStation and through the T-Desk application. System Specifications RF Frequency: 2400-2480 RF Scheme: FHSS with TDMA Effective radiated power: 100mW using 2 dBi antenna Receiver Sensitivity: -93 dBm to 10 -5 RIC Certification Radio: FCC Part 15.247 and 300.328 ETS rules and exempt Transmission Range: 1,000 Feet in ideal conditions (500 to 900 feet typical) Dynamic Audio Track: > 94dB Audio Frequency Response: 300Hz-3.8KHz with proprietary audio voice System latency: Less than 50ms direct BaseStation Specifications Intercom Audio Channels: 4 Duplex Stations Complete by BaseStation: 5 (in Normal Mode) Half-Duplex, Shared BeltStations by base station: Unlimited Number of Antenna Ports per BaseStation: 2 Type of Antenna Connector: RP-TNC Number of Base Stations Synchronized: 10 BaseStation / BeltStation connection: Through Mini-jack / cable provided Programming Port: USB Stage GPO Locks: 6 relays via DB15 2-wire interface Intercom: 4 channels via XLR-3F with 2 wires Compatibility: 4-wire connection Matrix: 4 ports via RJ-45 Aux Input: ¼ "3-conductor accepts -4 to +8 dB, balanced, isolated from transformer Auxiliary output: ¼ "Driver Jack rated -4 to +8 dB, balanced, isolated transformer Stage Output: XLR-3M, nominal -4 to +8 dB, balanced, isolated transformer Front Panel Headset: 4-pin male connector Microphone Type: Dynamic or Electret, Auto-selected Front Panel LCD Display: 240 x 64 resolution 32 light gray L scale Dimensions (inches): 1-RU unit, H 1.75 "x W 19.0" x D 12 " Weight: 10.5 lbs AC entry: 85-264 VAC at 50-60 Hertz, 15 Watts DC: 11-32 VDC, 12 Watts Operating Environment: -20 ° to 50 ° C -> 10% to 90% Humidity